For at få adgang til kundesupport, software downloads og informationer vedrørende 3M Camcorder Projector, gå venligst til 3M Knowledge Base (US, English Only).
The 3M™ Camcorder Projector manualer kan ses eller downloades fra følgende links. Du skal bruge Adobe Acrobat Reader eller lignede PDF-fil læser program for at se vejledningerne.
Sådan downloader du produktmanualer
Klik på linket
Filen vil downloades til din computer og derefter åbnes i PDF viewer.
Klik på Gem knappen i PDF fremviseren, og vælg placering på computeren.
The 3M™ Camcorder Projector manualer kan ses eller downloades fra følgende links. Du skal bruge Adobe Acrobat Reader eller lignede PDF-fil læser program for at se vejledningerne.
Sådan downloader du produktmanualer
Klik på linket
Filen vil downloades til din computer og derefter åbnes i PDF viewer.
Klik på Gem knappen i PDF fremviseren, og vælg placering på computeren.
Kan jeg fremvise min computers skærm ved hjælp af 3M Camcorder Projector?
3M Camcorder Projector har ikke en VGA port. (En VGA port bruges til at forbinde din computer til din skærm.) Kun hvis din computer har en AV adapter, som kan forbinder din computer til et TV, kan du bruge 3M Camcorder Projector til at fremvise billeder fra computeren.
Kan jeg tilslutte en DVD afspiller til 3M Camcorder Projector og se film?
Ja. Der følger et kort AV kabel med 3M Camcorder Projector. Sæt AV kablet i AV porten på 3M Camcorder Projector og forbind til DVD afspilleren.
Kan jeg overføre en PowerPoint præsentation på 3M Camcorder Projector og projektere det?
3M Camcorder Projector kan ikke åbne Microsoft Powerpoint filer, men den kan godt åbne jpg filer. Du kan gemme din powerpoint fil som en jpg fil og uploade disse til 3M Camcorder Projector.
Kan jeg tilslutte min mediaafspillere til 3M Camcorder Projector og projektere indholdet?
Hvis din mediaafspiller kan tilsluttes et TV via Composite Video (gul) og Right/Left (rød/hvid) audio kabel kan du også tilslutte det til 3M Camcorder Projector. De fleste mediaafspillere har behov for en speciel AV adapter som ekstra tilbehør. En AV adapter tilsluttes din mediaafspiller og har et gult, hvidt og rødt stik i den anden ende.
Hvilke type SD-kort kan jeg anvende?
Du kan anvende microSDHC kort med hukommelsekapacitet op til 32 GB. Når du vælger microSD kort skal det være en klasse 4 eller derover. Kortets klasse er indikeret ved et nummer der er placeret indeni et stort C. (Klassen står for kortets hastighed. Klasse 4 eller højere er bedst til HD video.)
Hvilke videoformater kan 3M Camcorder Projector afspille?
3M Camcorder Projector kan afspille mp4 filer med H.264 encoded videoer og ACC encoded audio. Den højeste opløsning er 1280x720. Maksimum audio kanal er 2.
Hvad er der på den medfølgende CD-rom?
På den medfølgende CD-rom findes 3M Camcorder Projector manualen og ArcSoft Media Converter software. ArcSoft Media Converter konverterer andre vidoe formater til et video format 3M Camcorder Projector kan afspille.
Hvad kan jeg gøre med HDMI-porten på 3M Camcorder Projector?
3M Camcorder Projector er udstyret med et HDMI output, som kan forbindes til et HDTV og fremvise indholdet på 3M Camcorder Projectors LCD skærm på HDTV'et. Se hvordan du skal forbinde 3M Camcorder Projector til et HDTV i "How to" sektionen.
Hvad kan jeg gøre med USB-porten på 3M Camcorder Projector?
Du kan anvende USB porten på 3M Camcorder Projector til at overføre filer frem og tilbage mellem 3M Camcorder Projector og en computer. Se hvordan i "How to" sektionen.
Hvad kan jeg gøre med AV-porten på 3M Camcorder Projector?
AV porten på 3M Camcorder Projector har to funktioner: audio output og video/audio input. Du kan enten forbinde dine høretelefoner eller du kan tilslutte en AV adapter og input video og audio fra en DVD afspiller eller mediaafspiller.
Hvilke billedefiler kan 3M Camcorder Projector læse?
3M Camcorder Projector kan læse og fremvise JPG billeder op til 8 mega pixel.
Vil 3M Camcorder Projectors strømforsyning virke i andre lande?
Strømforsyningen kan bruges til 100-240 Volts og de medfølgende adaptorer gør det muligt at anvende den i USA, Australien, UK, Europa og Brasilien.
Frequently Asked Questions
Q: How long does it take to charge the battery?
A: It takes about three hours to fully charge the battery when the projector is off and up to six hours when the projector is being used.
Q: How long will the battery last once charged?
A: When the battery is brand new and fully charged‚ the battery will last about 2 hours.
Q: What happens if I overcharge the battery?
A: There are protection circuits in the projector and the battery that prevent over charging.
Q: If my battery is dead‚ can I use the power adapter to power the projector?
A: You can use the power adapter with the projector.
Q: Are there any replacement parts in the projector?
A: The battery is the only replaceable part in the projector.
Q: Can I replace the lamp?
A: NO. The light source is a LED and cannot be replaced.
Q: Can I connect my gaming system to the 3M Mobile Projector?
A: If the gaming system has a composite video‚ component video or VGA output‚ it can be connected to the 3M Mobile Projector.
Q: What computer resolutions/refresh rates does my Mobile Projector support?
A: 3M mobile projectors support:
Description
Resolution (width × height)
Refresh Rate
VGA
640 × 480
60 Hz
SVGA
800 × 600
60 Hz
XGA
1024 × 768
60 Hz
WXGA
1280 × 768
60 Hz
1280 × 960
60 Hz
1440 × 900
60 Hz
MAC
640 × 480
67 Hz
832 × 624
75 Hz
1152 × 870
75 Hz
Q: What is the native resolution?
A: SVGA (800 × 600)
Q: What is the maximum resolution?
A: WXGA (1280 × 768 or 1280x960)
Q: Does the 3M Mobile Projector have a menu system?
A: There is no menu system but there is a status icon and led indicator.
Q: Can the Mobile Projector project at a 16:9 aspect?
A: The 3M Mobile Projector always projects at a default 4:3 aspect ratio. If you wish to have 16:9 video‚ select a video that is letter boxed. This is a 16:9 movie that has black bars on the top and bottom of the image.
Q: What microSD card size does the 3M Mobile Projector support?
A: The 3M Mobile Projector supports up to a 16 GB microSD card.
Q: How do I update the software (firmware) on the Mobile Projector?
A: Go to the How To Documents section and follow the directions for updating software.
Q: How do I clean the projector lens?
A: A cotton swab is a good tool for cleaning the lens. When cleaning the lens‚ hold the lens in place using the focus knob and then gently remove the dust and dirt. Do not use harsh chemicals like acetone because it will damage the lens and other plastic parts.
Q: Can I use this projector in other countries?
A: Yes‚ the power supply has interchangeable outlet adapters and can fit most outlets. Before you plug the power adapter into a wall outlet make sure the outlet voltage is compatible with the voltage rating marked on the power adapter label.
Q: Is there a small stand or tripod option available for the 3M Mobile Projector?
A: The projector comes with a desktop tripod. The projector does have a standard 1/4-20” tripod mounting point in the event you want to mount the projector via a camera tripod.
Q: Can I connect my Apple Computer to the 3M Mobile Projector?
A: Yes‚ connect your Apple computer using the VGA cable and set the Mac resolution to VGA‚ SVGA or XGA. Apple computers require the Apple VGA adapter. For additional information‚ check the “How to Section” of this website.
"How to"
Indsætte microSD kort
Indsæt microSD kortet ind i microSD porten (kontakter skal vende opad) indtil det 'klikker' på plads.
Luk microSD porten igen.
Nu er du klar til at vælge SD-kortet som den hukommelse, hvor dine fotos og videoer vil blive gemt.
Tage microSD kort ud
åben microSD porten
Skub microSD kortet ind i microSD porten indtil det 'klikker'.
Tryk blidt på microSD kortet og det vil skubbe ud
Tænd for 3M Camcorder Projector
Tryk på Menu knappen
Tryk på den højre pileknap indtil Settings Menuen (Skruenøgle ikonet) er valgt.
Tryk på pil ned indtil Selected Card er valgt.
Tryk på Ok knappen og en liste med to ikoner vises: En computerchip med 'INT' på det, og et SD-kort.
Tryk på ikonet på den interne hukommelse (internal memory) eller SD-kortet ved hjælp af pil Op og Ned knapperne.
Når det er valgt, vil ikonet for hukommelse, du vælger vises i menulinjen øverst på skærmen. Dette ikon angiver hvor dine fotos og videoer gemmes, hvad du ser og hvad computeren vil se, når den er tilsluttet via USB. Alt dette vil blive dækket i de andre videoer.
Få adgang til filerne på 3M Camcorder Projector ved hjælp af din computer
Uanset om din computer kører Microsoft® Windows® eller Apple® Mac OS 10, vil adgangen til filerne på din 3M Camcorder Projektor være hurtig og nem tilgængelig.
Her er hvad du har brug for:
3M Camcorder Projector med dine fotos og videoer klar til download
USB kabel (inkluderet med CP45)
Din computer
Trin:
Tænd din 3M Camcorder Projector og vælg den hukommelse du ønsker adgang til. (Se "Vælg hvor du vil gemme dine fotos og videoer").
Tænd din computer.
Tilslut din 3M Camcorder Projector til computeren med USB-kablet.
Et nyt drev vil vise sig på din computers fil browser.
De fotos og videoer der er taget af 3M Camcorder Projector er placeret i DCIM-mappen. Nu er du klar til at overføre filerne fra 3M Camcorder Projector til din computer.
Når du er færdig med at flytte dine filer over til computeren, kan du tage USB-kablet ud og begynde at tage fotos og videoer igen.
Vis dine fotos og videoer på et HDTV
3M Camcorder Projector er udstyret med en HDMI-udgang, der kan tilsluttes et HDTV og vise hvad der er på 3M Camcorder Projector LCD panel på et HDTV. Du kan vise hvad kameraet ser, fil listen, foto slideshow og videoer. Her er hvordan…
Her er hvad du har brug for:
CP45
KDMI mini til HDMI-kabel
TV eller Display med en HDMI-indgang (Ikke alle TV - HD eller ej - har HDMI-indgang)
BEMæRK: Nogle computerskærme med en DVI-indgang kan også fungere med tilføjelse af en DVI til HDMI konverter. Den eneste ulempe (afhængigt af skærmen) er, at der er ingen lyd ved afspilning af videoer.
Trin:
Tilslut din 3M Camcorder Projector til et TV via HDMI-kablet.
Ved hjælp af TV'ets fjernbetjening, vælg den tilsvarende HDMI-indgang.
Nu skal CP45 LCD panelet være tomt og CP45 indholdet er på TV'et.
HDMI-kabel (Ekstraudstyr)
Slet filer gennem 3M Camcorder Projector menu system
Du kan slette fotos eller videoer du lige har taget, én ad gangen eller flere ved hjælp af CP45 Menu systemet. Uanset hvad, gør 3M Camcorder Projector det nemt.
Slet et billede eller video du lige har taget
Hvis du ikke er tilfreds med det foto eller den video du lige har taget, så er her en hurtig vejledning til at slette det:
Tryk på OK knappen og Quick Playback menuen vises.
Vælg Quick Playback med Op eller Ned piletasterne og tryk OK.
Tryk på knappen Menu og Delete dialog vil vises.
Vælg Yes i dialogboksen og tryk på OK knappen.
Nu er fotoet eller videoen slettet.
Slet et billede eller video mens du ser det
Tryk på den venste pileknap
Vælg DCIM-mappen ved hjælp af Op eller Ned piletasterne og tryk på OK
Vælg MEDIA mappen og tryk OK
Vælg en JPG (foto) fil eller MP4 (video) fil og tryk OK
BEMæRK: Mens du ser et billede, kan du trykke på Højre eller Venstre knap for at flytte til næste eller forrige fil i fillisten.
Tryk på Menu knappen og Delete dialog vil vises.
Vælg Yes i dialogboksen og tryk på OK knappen.
Nu er fotoet eller videoen slettet.
Slet flere fotos eller videoer
Der er to dele til at slette flere fotos eller videoer på en gang: først skal du markere filen med et flueben, derefter skal du udføre kommandoen Delete.
Marker en fil med et flueben
Du kan markere en fil med et flueben, mens du ser den på fillisten eller visning på LCD-panelet eller projekterer. Når du har valgt filen eller kigger på den fil, du ønsker at markere, skal du følge disse trin:
Tryk og hold på knappen OK
Et flueben vises på eller ved siden af filen
Slet flere filer på én gang
Når du har markeret flere filer med flueben, kan du slette dem alle.
Mens listen af fluebens markerede filer vises, skal du trykke på Menu knappen.
Delete, Protect eller Unprotect listen vises.
Sørg for at Delete er valgt (den har et orange rektangel omkring sig) og tryk på OK.
Nu vil alle filer med et flueben slettes.
Beskyt billeder og videoer fra at blive slettet
Hvis du ønsker at forhindre at et foto eller en video bliver slettet ved et uheld, har CP45 en beskytter funktion. Du kan beskytte en eller flere filer ved at placere et flueben ved siden af dem, og derefter følge disse trin.
Mens den valgte fil eller liste af fluebens markerede filer vises, skal du trykke på Menu knappen.
Delete, Protect eller Unprotect listen vises.
Vælg Protect ved hjælp af pil Ned piletasten (den har et orange rektangel omkring sig, når valgt) og tryk OK.
Nu ville de valgte filer være beskyttet og have en lås ved siden af dem.
Tag et billede
Tryk på Op/Ned piletasterne for at zoome ind eller ud.
Tryk på Kamera knappen for at tage et billede () .
Tag en video
Tryk på Op/Ned piletasterne for at zoome ind eller ud.
Tap the RecordTryk på Record knappen for at starte optagelsen. () Record knappen bliver rød når du optager, og videooptagelse timeren vil begynde at starte.
Tryk på knappen Record igen for at stoppe optagelsen. Record knappen lyser hvidt for at angive, at den er i standby-tilstand.
Mens du er i optagetilstand, tryk på OK knappen for at holde pause i optagelsen. Tryk på OK knappen for at genoptage optagelsen.
NOTE: CP45 optager i op til 25 minutters videoklip. I slutningen af 25 minutters klippet, vil CP45 spørge, om du vil fortsætte med at optage.
Fremvis et billede eller video
Tryk på den Venstre piletast.
Tryk på Op/Ned piletasterne for at vælge destinationsmappen.
Når du vælger en fil, skal du trykke på OK-knappen for at afspille den.
Tryk på Projection knappen () for at projektere. ( Bliver blå i working mode; bliver hvid i standby mode.)
Afspil en video
Tryk på Venstre/Højre piletasterne for at flytte til forrige/næste fil.
Tryk og hold Venstre/Højre piletasterne for at spole hurtigt frem og tilbage.
Brug Op/Ned piletasterne til at styre lydstyrken
Tryk på OK knappen for at pause videoen (tryk på OK igen for at genoptage). De følgende statusopdateringer vises.
Anvend CP45 som en almindelig projektor
Du kan bruge CP45 til at projektere indhold fra din DVD eller medieafspiller, der har en komposit videoudgang (typisk et gult stik) og analog stereo lydudgang (typisk et rødt og hvidt stik).
Tilslut komposit AV-kablet til medieafspillerens video-og audio udgang.
Tilslut projektorens AV-kabel til AV-stikket på projektoren.
Tilslut projektorens AV-kabel til komposit AV-kablet på projektoren fra medie enheden (gul til gul, hvid til hvid og rød til rød).
How to Tips
Connecting the iPod or iPhone to a 3M Mobile Projector
Connect the video cable to the projector’s VGA-AV input.
Connect the other end of the video cable to your Apple Device.
Watching a Video or Photo Slideshow
On your Apple® Device‚ start a video or photo slideshow. Some Apple Devices require you to turn on "TV out" in Videos>Settings before watching a video or slideshow on the projector.
Note:The iPad 2 is able to output a mirror image of what is displayed on its screen. The 3M Computer
Cable (Consumer UPC: 05112563471) and the Apple® VGA Adapter are necessary to project the mirror
image using the 3M projector. The 3M Computer Cable is sold separately by 3M and the Apple VGA
Adapter is sold separately by Apple‚ Inc.
Troubleshooting Notes:
If you see the 3M logo screen‚ your device is not sending video to the 3M projector. Refer to the User Guide for your Apple device and look for “Watching a Video”‚ “Slideshows” and “TV out.”
If the iPod is already playing a video‚ it will not play on the projector until you stop the video and start it again.
Connecting to a Computer running Microsoft Windows
What you need:
Computer with VGA port
Note: Some computers (like some notebook computers) will require a VGA adapter.
3M Mobile Projector VGA cable
3M Mobile Projector
Connecting the computer to the 3M Mobile Projector
Turn on both the projector and the computer.
Connect the VGA cable to the VGA/AV port on the projector.
Connect the VGA cable to the VGA port on the computer.
The computer should automatically detect the projector and output your desktop image.
Notes about the 3M Mobile Projector:
When you connect the VGA cable to the projector‚ the projector will detect the cable and display the VGA icon ().
When the computer outputs a VGA signal‚ the projector will detect‚ display the VGA icon and the input resolution and display the image.
Troubleshooting Notes:
If the projector does not detect an input signal‚ press FN button and monitor button at the same time to toggle through the computer’s different display modes ( LCD‚ Monitor‚ or Both). The monitor button is different on every computer. Most monitor buttons have one of the following on it: LCD/CRT‚ icon‚ etc.
If the input resolution is not one of the following resolutions: VGA‚ SVGA‚ XGA‚ or WXGA (1280 × 768)‚ the projector will display the question icon ().
If the projector still does not display the computer‚ try the following “How To” document for your video adapter on the site.
To determine the video adapter application installed on your computer running Microsoft‚ follow these steps: 1. Right Click the desktop and a context menu will appear‚ 2. select “Properties” from the menu and the “Display Properties” will appear‚ 3. select the settings tab and then click the Advanced button and “Plug and Play Monitor…” dialog box will appear‚ and 4. click the Adapter tab and look at the Adapter Type. You should see the manufacture name and model of your video adapter like Intel‚ NVIDIA‚ or ATI. You may also see tab that takes you to the video adapter setup software.
Connecting to a computer running Mac OS 10
You will need the following:
Apple Computer.
Apple VGA adapter.
3M Mobile Projector.
3M Mobile Projector VGA cable.
Connecting the computer and projector
Attach the VGA adapter to the Apple Computer.
Attach the 3M cable to the projector.
Connect the cable from the Apple Computer to the cable from the 3M Mobile Projector.
Turn on both the projector and the computer.
Displaying an image on the 3m Mobile Projector
Choose Apple menu > System Preferences.
Choose Displays.
Click Detect Displays.
Click Gather Windows.
Select the projector display pane.
Confirm the Resolution setting is 800 × 600‚ 1024 × 768‚ or 1280 × 768.
Confirm the Refresh Rate is 60 Hertz.
Note:For best results‚ set the computer resolution to SVGA (800 × 600).
Configuring an Intel Graphics Media software for the 3M Mobile Projector
When the Intel video card in your computer does not automatically recognize the 3M Mobile Projector‚ it may not output an image to the projector. In the following instruction you will manual setup the video card for the Pocket Project by opening Intel Graphics Media Accelerator driver‚ clone the display (that is display the same thing on both the laptop screen and the projector)‚ set the resolution to 800 × 600 and the refresh rate to 60 Hz.
Open Intel Graphics Media software by right clicking the desktop and click Graphic Properties from the context menu. (A context menu is a menu that pops up when you right click an icon or the desktop and shows you list function based on what you clicked.)
Intel Graphics Media software will appear.
In the Display Devices tab‚ select the Intel® Dual Display Clone radio button and then press the Apply button.
In the Display Setting tab‚ select 800x600 from the resolution drop-down list and then press the Apply button.
While in the Display Settings tab‚ select the Monitor tab from the Notebook and Monitor tabs at the top of the window. Then select 60 Hz from the Refresh Rate drop down list. Finally‚ press the apply button.
You should now see the same image on your laptop screen and the 3M Mobile Projector.
Troubleshooting Tip
If the monitor tab does not appear at the top of the window‚ the computer’s video card does not detect the 3M Mobile Projector. The cable may be loose or the projector is turned off.
Configuring an nVidia video card on a computer running Windows for the 3M Mobile Projector
When the nVidia video card in your computer does not automatically recognize the 3M Mobile Projector‚ it may not output an image to the projector. In the following instruction you will open the nVidia Control Panel‚ clone the display (display the same thing on both the laptop screen and the projector) and set the resolution to 800 × 600 and the refresh rate to 60 Hz.
Open nVidia Control Panel by right clicking the desktop and then clicking nVidia Control Panel from the context menu. (A context menu is a menu that pops up when you right click an icon or the desktop and shows you list function based on what you clicked.)
nVidia Control Panel software will appear. Under the Display option click setup multiple displays.
In the Setup multiple devices tab‚ select “The same on both Displays (Clone)” as the nView Display mode and click apply.
Next select “Change Resolution” under the Display tab‚ select the Mobile Projector as the display you would like to change and Select 800 × 600 from the resolution drop-down list and 60Hz from the refresh rate‚ then press the Apply button.
You should now see the same image on your laptop screen and the 3M Mobile Projector.
Fejlfinding
Projektoren vil ikke tænde
Batteriet er ikke opladt, eller strømforsyningen er ikke tilsluttet projektoren gennem en fungerende stikkontakt. Test stikkontakten ved at tilslutte en anden elektrisk enhed i stikkontakten og bekræft at stikkontakten virker.
Billedet er ikke synligt, eller er meget svagt
3M Camcorder Projector er en batteridreven projektor og kræver kontrollerede lysforhold. Billedet kan forekomme svagt i meget lyse lokaler. Projekter billede på en hvid overflade. Nedsæt lyset på overfladen, hvor billeder bliver projekterer på. Formidnsk størrelsen på billedet.
Min video-enhed er tilsluttet projektoren, men projektoren vil ikke afspille videoen.
Tag AV kablet fra projektoren og et hvidt billede med et 3M logo vises. Tilslut AV kablet igen og den vil bede dig om at vælge mellem høretelefoner og AV in. Tilslut derefter din video enhed.
Troubleshooting
The projector will not turn on.
A full charged battery is not installed or the power adapter is not connected to the projector and a working wall outlet.
Hold down the power button until the projector powers up.
The Status Indicator is flashing red when the power button is held down.
The battery needs to be charged.
The image is not visible or is very dim.
The 3M MP225a is a battery operated projector and requires controlled lighting conditions. The image may appear very dim in brightly lit rooms.
Make sure the status indicator is green. This indicates that the projector is powered on and projecting an image.
Project the image onto a flat‚ white surface.
Decrease the light on the surface where the image is being projected.
Decrease the size of the image.
The projector is displaying a question mark.
The projector does not support the video or computer input signal. Switch to a video or computer signal that the projector supports. Take a look the how to section for connecting a computer and media player.
A computer is connected to the projector but the projector will not display the computer’s image.
Unplug the VGA-Audio cable from the projector and a white image with the 3M logo will display. If start up screen does not appear‚ please contact us and we will assist you.
Plug the VGA – Audio cable into the projector and the icon in the upper-left corner of the image will change from a “waiting on cable” to the “VGA-Audio cable” icon.
The projector is making a noise.
The projector has a small fan for cooling the LED light source. The fan turns on and off automatically based on the projector’s internal temperature. The fan will turn on more often in warm environments or at high altitudes.
The speakers make noise when the component AV cable is not correctly connected to the video device. There are two red connectors on the component AV cable. One is for the right audio channel and the other is for the Pr component video signal. If these connectors are switched‚ the projected image will appear green and an abnormal noise will come from the right speaker.
My video device is connected to the projector but the projector will not display the video.
Unplug the AV cable from the projector and a white image with the 3M logo will display.
Plug the AV cable into the projector and the icon in the upper-left corner of the image will change from a “waiting on cable” to the “VGA-Audio cable” icon.
Make sure the video output or TV out is turned on or selected in the video device menu system.
Status Indicator lights.
Status Light
Description/ Meaning
Status Indicator Flashing Red
The projector can not turn on because the battery needs to be charged.
Status Indicator Amber
The projector is off and charging the battery.
Status Indicator Blank (Off)
Projector is turned off.
If the power adapter is connected to the projector and the battery is installed‚ the battery is fully charged.
Status Indicator Green
The projector is on.
Status Indicator Flashing Green
The projector has overheated and needs to cool.
Descriptions and Meanings of On Screen Icons.
Icon
Description/ Meaning
The projector is waiting for the A/V cable to be connected.
The projector detects the audio/video cable.
The projector detects an NTSC video input signal.
The projector detects a PAL video input signal.
The projector detects the component audio/video cable.
The projector detects the video input signal and displays the video source’s resolution and refresh rate below the component icon.
The projector detects the VGA-Audio cable.
The projector detects computer input signal and displays the input resolution and refresh rate.
The projector does not support the video signal.
The projector is measuring and synchronizing to video input signal.
Warranties
Limited Warranty
This warranty applies to the continental US only. The warranty terms‚ conditions‚ remedy and limitations may vary in other countries.
Contact your local 3M company for warranty information.
The 3M™ Camcorder Projector CP45 (the “3M product”) is warranted to be free from defects in material or manufacture for a period of 1 year from the date of purchase.
All other accessories included with the 3M product are warranted to be free from defects in material or manufacture for a period of 1 year from the date of purchase.
Optional product accessories that are not sold as part of the 3M product are subject to individual warranties.
THE WARRANTIES STATED ABOVE ARE EXCLUSIVE AND ARE MADE IN PLACE OF ANY AND ALL WARRANTIES‚ EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS‚ INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE‚ OR ANY INDUSTRY PRACTICE OR CUSTOM OR TRADE USAGE.
In the event the 3M product fails to conform to the above stated warranties within the applicable warranty period‚ your exclusive remedy shall be‚ at 3M’s option‚ to replace or repair the 3M product or to refund the purchase price of the 3M product. All replaced parts or products become property of 3M. If the product is repaired‚ 3M will repair the defective part(s) with a new or used part(s). If the 3M product is replaced‚ 3M will replace the 3M product with the same or equivalent model and with a new or refurbished 3M product. In the case of an approved warranty claim‚ the replacement 3M product will carry only the remaining term of the original 3M product’s warranty period as stated above. For warranty service‚ you must provide proof of the date of the original purchase else the manufacturing code date will be used to establish the start date of the warranty. The following are exclusions to the above listed warranty:
This warranty does not cover 3M product that is modified or damaged through improper storage‚ misuse‚ abuse‚ accident‚ vandalism‚ improper installation‚ neglect‚ improper shipping‚ damage caused by acts of war‚ disasters such as fire‚ flood‚ and lightning‚ improper electrical current‚ software problems‚ interaction with non-3M products‚ or service other than by an 3M Authorized Service Provider‚ neglect or mishandling by any person. Normal wear and tear is not covered under warranty.
3M product is designed to operate in the typical indoor environment. This warranty does not cover 3M product used outside of the following circumstances:
• 100V – 240V AC‚ 50/60 Hz
• 10° – 30°C (50° – 86°F)
• 10 – 80% RH (without condensation)
• 0 – 1829 m (0 – 6000 feet) above sea leve
The air intake and exhaust vent must be clear of obstructions. Inadequate air ventilation will cause the 3M product to malfunction or will cause damage to the 3M product which will void the warranty.
This warranty does not cover any additional costs including‚ but not limited to‚ those associated with removal‚ cleaning or installation of the 3M product‚ adjustments‚ (mechanical or electronic) made to the 3M product.
This warranty covers only normal use of the product. 24-hour-per-day or other excessive continual use causes strain and is not considered normal use.
This warranty does not cover consumables (e.g.‚ batteries).
This warranty is not transferable.
3M is not responsible for warranty service should the 3M label or logo or the rating label or serial number be removed unless otherwise stated in writing for the purposes of private labeling for partnership requirements.
This warranty does not cover postage‚ insurance‚ or shipping costs incurred in presenting your 3M product for warranty service. Said costs are the customer’s responsibility. If a claimed defect cannot be identified or reproduced in service‚ the customer may be held responsible for cost incurred. Should your warranty upgrade include a “change out” service and the claimed defect cannot be identified or reproduced by the technician‚ the customer will be responsible for call out costs.
FAILURE TO FOLLOW THE INSTRUCTIONS CONTAINED IN THE APPROPRIATE 3M PRODUCT MANUAL OR TO USE THE 3M PRODUCT IN ACCORDANCE WITH 3M’S INTENDED USE STATEMENT‚ WILL VOID ALL WARRANTIES AND LIMITED REMEDIES.
EXCEPT AS SPECIFICALLY STATED IN THE APPLICABLE 3M PRODUCT MANUAL‚ 3M SHALL NOT BE LIABLE FOR ANY INDIRECT‚ INCIDENTAL‚ SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING‚ BUT NOT LIMITED TO‚ LOSS OF PROFITS‚ REVENUE OR BUSINESS) RESULTING FROM‚ OR IN ANY WAY RELATED TO PERFORMANCE‚ USE OR INABILITY TO USE ANY OF THE 3M PRODUCT. This limitation applies regardless of the legal theory upon which damages are sought.
For warranty support‚ please call or write your local 3M office or a 3M Authorized Service Provider to obtain an RMA # (Return Material Authorization number) before returning the product. If you are inside the Continental United States of America‚ please contact 3M Customer Service at 1-866-631-1656 or email meetings@mmm.com.
What 3M Will Do To Correct Problems:
If your 3M product requires service‚ 3M will ask you to bring or send the 3M product‚ securely packaged in its original container or equivalent‚ along with proof of the date of original purchase‚ to your 3M Service Dealer or 3M Service Center.
3M will‚ at its option‚ repair or replace the defective unit without charge for parts or labor. Return of the 3M product will be at 3M’s expense.
When warranty service involves the exchange of the 3M product or of a part‚ the item replaced becomes 3M property.
The exchanged 3M product or part may be new or previously refurbished to the 3M standard of quality‚ and at 3M’s option‚ the replacement may be another model of like kind and quality.
3M’s liability for replacement of the warranted 3M product or part will not exceed the original retail selling price of the 3M product. Exchange or replacement products or parts assume the remaining warranty period of the product covered by this limited warranty.
Warranties
Limited Warranty
The 3M™ Mobile Projector (the “3M product”) is warranted to be free from defects in material or manufacture for a period of 1 year from the date of purchase.
All other accessories included with the 3M product are warranted to be free from defects in material or manufacture for a period of 1 year from the date of purchase.
Optional product accessories that are not sold as part of the 3M product are subject to individual warranties.
THE WARRANTIES STATED ABOVE ARE EXCLUSIVE AND ARE MADE IN PLACE OF ANY AND ALL WARRANTIES‚ EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS‚ INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE‚ OR ANY INDUSTRY PRACTICE OR CUSTOM OR TRADE USAGE.
In the event the 3M product fails to conform to the above stated warranties within the applicable warranty period‚ your exclusive remedy shall be‚ at 3M’s option‚ to replace or repair the 3M product or to refund the purchase price of the 3M product. All replaced parts or products become property of 3M. If the product is repaired‚ 3M will repair the defective part(s) with a new or used part(s). If the 3M product is replaced‚ 3M will replace the 3M product with the same or equivalent model and with a new or refurbished 3M product. In the case of an approved warranty claim‚ the replacement 3M product will carry only the remaining term of the original 3M product’s warranty period as stated above. For warranty service‚ you must provide proof of the date of the original purchase else the manufacturing code date will be used to establish the start date of the warranty. The following are exclusions to the above listed warranty:
This warranty does not cover 3M product that is modified or damaged through improper storage‚ misuse‚ abuse‚ accident‚ vandalism‚ improper installation‚ neglect‚ improper shipping‚ damage caused by acts of war‚ disasters such as fire‚ flood‚ and lightning‚ improper electrical current‚ software problems‚ interaction with non-3M products‚ or service other than by an 3M Authorized Service Provider‚ neglect or mishandling by any person. Normal wear and tear is not covered under warranty.
3M product is designed to operate in the typical indoor environment. This warranty does not cover 3M product used outside of the following circumstances:
• 100V – 240V AC‚ 50/60 Hz
• 10° – 30°C (50° – 86°F)
• 10 – 80% RH (without condensation)
• 0 – 1829 m (0 – 6000 feet) above sea leve
The air intake and exhaust vent must be clear of obstructions. Inadequate air ventilation will cause the 3M product to malfunction or will cause damage to the 3M product which will void the warranty.
This warranty does not cover any additional costs including‚ but not limited to‚ those associated with removal‚ cleaning or installation of the 3M product‚ adjustments‚ (mechanical or electronic) made to the 3M product.
This warranty covers only normal use of the product. 24-hour-per-day or other excessive continual use causes strain and is not considered normal use.
This warranty does not cover consumables (e.g.‚ batteries).
This warranty is not transferable.
3M is not responsible for warranty service should the 3M label or logo or the rating label or serial number be removed unless otherwise stated in writing for the purposes of private labeling for partnership requirements.
This warranty does not cover postage‚ insurance‚ or shipping costs incurred in presenting your 3M product for warranty service. Said costs are the customer’s responsibility. If a claimed defect cannot be identified or reproduced in service‚ the customer may be held responsible for cost incurred. Should your warranty upgrade include a “change out” service and the claimed defect cannot be identified or reproduced by the technician‚ the customer will be responsible for call out costs.
EXCEPT AS SPECIFICALLY STATED IN THE APPLICABLE 3M PRODUCT MANUAL‚ 3M SHALL NOT BE LIABLE FOR ANY INDIRECT‚ INCIDENTAL‚ SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING‚ BUT NOT LIMITED TO‚ LOSS OF PROFITS‚ REVENUE OR BUSINESS) RESULTING FROM‚ OR IN ANY WAY RELATED TO PERFORMANCE‚ USE OR INABILITY TO USE ANY OF THE 3M PRODUCT. This limitation applies regardless of the legal theory upon which damages are sought.
For warranty support‚ please call or write your local 3M office or a 3M Authorized Service Provider to obtain an RMA # (Return Material Authorization number) before returning the product. If you are inside the Continental United States of America‚ please contact 3M Customer Service at 1-866-631-1656 or email meetings@mmm.com.
What 3M Will Do To Correct Problems:
If your 3M product requires service‚ 3M will ask you to bring or send the 3M product‚ securely packaged in its original container or equivalent‚ along with proof of the date of original purchase‚ to your 3M Service Dealer or 3M Service Center.
3M will‚ at its option‚ repair or replace the defective unit without charge for parts or labor. Return of the 3M product will be at 3M’s expense.
When warranty service involves the exchange of the 3M product or of a part‚ the item replaced becomes 3M property.
The exchanged 3M product or part may be new or previously refurbished to the 3M standard of quality‚ and at 3M’s option‚ the replacement may be another model of like kind and quality.
3M’s liability for replacement of the warranted 3M product or part will not exceed the original retail selling price of the 3M product. Exchange or replacement products or parts assume the remaining warranty period of the product covered by this limited warranty.
